Re: The front seat 1948 Packard 22nd Series Touring Sedan
Posted by Michael Evans On 2011/4/7 9:25:12
Hi All
Been away a little longer than I expected from pack.info - so here's an update.
There IS a floor fixed holed tab for the 'Forward/Backward assist spring' on my RHD car. Also there are approptiate holes for the other end in both the front to back of seat frame intermediate supports - so the seat frame can take the spring end whether it's a LHD or RHD car.
Dave's photo plus careful measuring of the distance between the floor mount and the holes in the seat frame lead me to believe that the spring is between 6 and 7 inches long.
Any correction on this estimation gratefully received.
Best regards to all Michael
Added : Photos of the cleaned up seat
Attach file:
(82.10 KB)
(67.68 KB)
Been away a little longer than I expected from pack.info - so here's an update.
There IS a floor fixed holed tab for the 'Forward/Backward assist spring' on my RHD car. Also there are approptiate holes for the other end in both the front to back of seat frame intermediate supports - so the seat frame can take the spring end whether it's a LHD or RHD car.
Dave's photo plus careful measuring of the distance between the floor mount and the holes in the seat frame lead me to believe that the spring is between 6 and 7 inches long.
Any correction on this estimation gratefully received.
Best regards to all Michael
Added : Photos of the cleaned up seat
Attach file:
(82.10 KB)
(67.68 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=73965