Re: Rear gear ratio

Posted by Tommy Hahn On 2011/4/5 16:24:29

PackardV8

Thanks for the info. I am capable of doing my own body work welding, using the english wheel, forming dollies and paint. I have built 3 Model A including a boat tail speedster from the ground up but that's the extent of my knowledge. Model A's and body work is pretty simple and somehow the engine swap of the Packard has be a little intimidated since from my world my group of close buddies call them moderns. I know from experience somewhat about gear ratios and alignment but on a Model A that part is simple as there are not as many variables as the Packard. I understand that the engine and trans. must be mounted level but driveline alignment has me a little bewildered as of yet. As I stated, I am wanting a daily driver and be able to drive 65-70 with a low engine rpm. If I had my druthers and the finances I would not change out the engine, however I must live within my financial situation. Again thanks to all for all of your input. I am sure I will want to pick your brains for info again.
Tommy