Re: Which Coil do you guys use?

Posted by Mike On 2011/4/21 20:13:29

I have no idea how to use a dwell meter or what it looks like.

At first i gapped them to spec on the bench with feeler gauges. spec was .0125 to .0175. I went with .014, fairly in the middle. So i made the gap at .014 at the top of the lift of the rotor lobe.

Then the points weren't closing all the way when on the flat side of the rotor. I can re gap them, but after some research i'm going to try the plugs first. I believe i have them at .045 but that's a decent cry from .035 to .030 the tuneup manual talks about, and that may be causing an issue. Otherwise, idles better, WOT from a stop light is fine, just seemed when i was getting up to cruising speed when it would miss and carry on a bit.