Re: Dash lights

Posted by HH56 On 2011/6/1 10:59:16
Agree with O_D. Don't know exactly how much you're planning to replace but think you'll find the wire very stiff and brittle. Trying to disconnect one, bend it or remove the loom fabric to get to a fresh part will probably result in more of the old rubber coming off on the one you are working on or another adjacent wire making the problem worse. I would think disconnecting and labeling all, then remove the dash so you can expose everything at once will make the situation much easier as well as less strain on the back and eyes.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=78196