Re: Checking transmission fluid

Posted by Mike On 2011/9/20 12:19:43

I have to pull the motor out of my 50 this winter, while it's out i'll drain the pan and install one of these as low in the pan as i can get it:http://www.summitracing.com/parts/LOK-1211247/

I think mounting on the drivers side and run up to the firewall should be no problem. Handle should be black and blend in decently. A small funnel can be used to fill it. In the worst case, if it doesn't work out, i can replace the pan with another pan or just plug the hole i drilled to install it. Should be quick and painless. Then just fill up to full on the regular dipstick and mark the new one with a punch if it's metal, or notch it if it's plastic.