Re: Carbuartor Rebuild
Posted by Mike On 2011/6/29 9:07:49
Attached is a pic of my 50 manifold with the same hole, you can see it's a solid "tunnel" between the two venturis and not broken into the exhaust jacket around the carb.
While i had a rough idle with this manifold, i suspect the rebuilt carb and not this manifold. Also, this manifold ran AMAZINGLY on my 288 about a year or so ago. Idled smooth, great WOT, plugs correct color, good vacuum etc.
If the hole doesn't seem to break into the exhaust chamber around the carb base, don't worry about it.
Attach file:
(140.96 KB)
While i had a rough idle with this manifold, i suspect the rebuilt carb and not this manifold. Also, this manifold ran AMAZINGLY on my 288 about a year or so ago. Idled smooth, great WOT, plugs correct color, good vacuum etc.
If the hole doesn't seem to break into the exhaust chamber around the carb base, don't worry about it.
Attach file:
(140.96 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=80579