Standard 8 '49 - oil pressure
Posted by Henrik Thomsen On 2008/2/26 4:02:26
After starting up the engine (288 straight eight from 1949), in my Packard 8, 2292, I have realized that the maximum oil pressure I can achieve is 30 psi.
The manual says 45psi.
When starting it takes about 30 seconds before oilpressure starts building up!
Should I worry or can the oil pressure maybe be adjusted somewhere in the pump?
I hope that someone has some experience here.....
best regards
Henrik Thomsen, Denmark
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=5433