Re: Water Distribution Tube Removal

Posted by casey rog On 2011/7/20 19:20:32

Thanks everyone for the advise on the removal of the water distribution tube. What I finally did was to get a six foot piece of the metal strapping we have at work (3/4" width) and ran it top, bottom, and both sides of the tube.
It came out very easily when I used a six foot piece of 5/6" diameter threaded rod with a 90 degree bend at one end to hook into one of the tube's holes. The last couple of holes were somewhat clogged. Hopefully that was the running hot problem. Once again, thanks everyone.
Casey Rog