Re: fog light switch

Posted by Mike On 2011/7/12 9:18:22

I bought a spare old switch panel from ebay and just used one of the other switches and moved it over to a different slot on mine to line up with the fog lights. When you take the switch panel apart or look up there (you'll likely have to move the climate controls panel) you'll see a bolt is holding that button out. If you take it out and put a switch in, you're good to go.

Just don't use a heater switch. It's also a good idea to just use that switch to run a relay, i'm blowing fuses from time to time running that switch, they seem kind of flimsy. Use a volt meter to make sure the switch works open and closed with every push before you put it in, to avoid finding out it needs cleaned after you have it installed.

If you find an old switch, they're not bad to take apart and clean and put some dielectric grease in.