Re: dreaded vapor lock
Posted by HH56 On 2011/7/31 21:32:17
I'm wondering about the diesel. Believe there was another thread after someone tried it and reported good results.
You can buy various ranges of phenolic rod or higher temp rated Garolite
http://www.mcmaster.com/#phenolic-rods/=df8q31
or
http://www.usplastic.com/catalog/item.aspx?itemid=23765&catid=679
and cut & drill your own insulators. Getting the exact OD size needed with standard sizes available is probably not going to happen so may need a bit of lathe or sanding work.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=82743