Re: No spark to coil
Posted by HH56 On 2011/8/7 17:48:46
If you have the normal positive ground, then the + side of coil would go to distributor and - side to the ignition switch.
You should have a very flexible cloth covered wire between the outside terminal and the points and condenser wire screw. Will look something like one of these only probably be black.
Attach file:
(46.06 KB)
You should have a very flexible cloth covered wire between the outside terminal and the points and condenser wire screw. Will look something like one of these only probably be black.
Attach file:
(46.06 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=83321