Re: No spark to coil

Posted by Mike On 2011/8/8 13:05:49
I don't recall being able to easily see spark at the points, i had new condensor and everything from MM also. IF the points are gapped close, and the spark plug gap isn't too wide (i think mine were at .040 when my spark was intermittent) you should see something at the plugs unless you have a bad coil or condensor.

That's assuming everything you've said so far about power to the coil and the points aren't shorted out, etc etc.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=83392