Re: Ultramatic will not let go when stopping - 1950

Posted by Mike On 2011/9/26 15:13:20

When you get under and look on the side of the case, you can't miss the governor cover.

If clean fluid didn't help within a few stops and starts, i'd think ross was right on with dirt in the governor.

Your car idles in neutral and park at the right rpm right? Idle not turned up? Have you ever driven the car and not had it stick? If so, then that'd kind of rule out any major linkage misadjustment.

Also, pay attention to the speed at when the converter locks up. That would rule out tv linkage adjustments also. Just food for thought, you're likely just going to be servicing the governor.