Re: 1948 Packard 22nd Series Six Touring Sedan Fur flexi covered water stops fitted to outside of - - -
Posted by Michael Evans On 2012/1/27 9:03:01
Hi Barrie
Abandoned trying to replace the one with the curved-up end fitted to the inside window trim (which is chrome on my car) but will be fitting a straight piece under it (glued on )actually we have cleaned and "fluffed" up the "furflex" quite well but adding a second new bit we consider will do no harm.
On the outside we have removed the old bits (practically nothing was left anyways)and abandoned them in favour of Woolies window to door rubber weatherstrip (tiny clips AND glue to keep in position)okay I know not strictly to spec. but hey it'll keep the water out - this is England where it rains a lot.
See attached photo.
I thought you said in your comment on my other Topic (22nd Series door problem - - )that you had used the Roto-Lokit kit - but someone thought that you meant you'd cured it some other way. Would you mind clearing this up please - I don't want to saw away at my car to fit the kit and find I can't !!!!
Look forward to your reply.
Cheers Michael
Attach file:
(20.86 KB)
Abandoned trying to replace the one with the curved-up end fitted to the inside window trim (which is chrome on my car) but will be fitting a straight piece under it (glued on )actually we have cleaned and "fluffed" up the "furflex" quite well but adding a second new bit we consider will do no harm.
On the outside we have removed the old bits (practically nothing was left anyways)and abandoned them in favour of Woolies window to door rubber weatherstrip (tiny clips AND glue to keep in position)okay I know not strictly to spec. but hey it'll keep the water out - this is England where it rains a lot.
See attached photo.
I thought you said in your comment on my other Topic (22nd Series door problem - - )that you had used the Roto-Lokit kit - but someone thought that you meant you'd cured it some other way. Would you mind clearing this up please - I don't want to saw away at my car to fit the kit and find I can't !!!!
Look forward to your reply.
Cheers Michael
Attach file:
(20.86 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=93701