Re: Wheel Studs
Posted by BigKev On 2008/4/1 21:54:32
Thanks for the advice guys.
When I got home today I broke out the Tap & Die set my wife bought me for X-mas and went to work.
The lug bolts themselves were the worst of it. So I cleaned up all the threads with a die, then I also chased the holes in the drums with a tap (1/2 x 20tpi).
So now I can screw the lug bolt all the way into the drums by hand. There is one dodgey lug bolt that I will replace as about 5 rows of threads are missing for the start of that bolt.
Attach file:
(47.32 KB)
(30.73 KB)
(41.80 KB)
(29.75 KB)
When I got home today I broke out the Tap & Die set my wife bought me for X-mas and went to work.
The lug bolts themselves were the worst of it. So I cleaned up all the threads with a die, then I also chased the holes in the drums with a tap (1/2 x 20tpi).
So now I can screw the lug bolt all the way into the drums by hand. There is one dodgey lug bolt that I will replace as about 5 rows of threads are missing for the start of that bolt.
Attach file:
(47.32 KB)
(30.73 KB)
(41.80 KB)
(29.75 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=6381