Re: help with engine #
Posted by JD in KC On 2012/1/31 22:41:00
Quote:
I don't know if the '52 build sheet was attached the same way as the '49 build sheet was but if it was you can feel for the two strips of tape on each edge of the build sheet and carefully lift the tape from the outside edges. The teletype paper is, as you indicated, very, very brittle. Here's mine (bottom one is from the glove box) showing the way it was taped.
I don't think it will have the engine number on it if that's what you were hoping for.
Tim49 wrote:
...the packard record keep-er told me to get the production slip off the top of the glove box.... wow it is so so fragile i did not want to force it. any advice on how to do this. ????...
I don't know if the '52 build sheet was attached the same way as the '49 build sheet was but if it was you can feel for the two strips of tape on each edge of the build sheet and carefully lift the tape from the outside edges. The teletype paper is, as you indicated, very, very brittle. Here's mine (bottom one is from the glove box) showing the way it was taped.
I don't think it will have the engine number on it if that's what you were hoping for.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=93991