Re: Oil Filter Lines
Posted by David Baird On 2008/8/15 11:06:47
This is the way mine is plumbed. It is on a 1949 327 without the drain hole at the bottom of the block. It has been installed for some years with quite a bit of mileage. It matches what Packard illustrated in the service letter. It works fine. I'm sure if you use this configuration you will be fine.
Attach file:
(59.00 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=11338