Re: Water pump/Engine mount
Posted by Joseph Earl On 2012/3/25 21:06:28
Success! I used a series of blocks on a floor jack under the frontmost part of the oil pan that I could access behind the crossmember. After removing the two front motor mount bolts, it easily lifted enough to clear the mount bracket.
I will need to get a new front motor mount.
The other issue is: how to remove the water distribution tube without tearing it up?
Any ideas would be greatly appreciated!
Attach file:
(62.57 KB) (88.02 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=97464