Re: Water pump/Engine mount

Posted by Ross On 2012/3/26 4:34:09
I usually reach in on the upper left corner where there is a gap and grab it with my needlenose vise grips. Tubes that are wet like yours will often come out with a moderate tug.

You are doing a nice thorough job, and although it is "mission creep" you might want to yank your freeze plugs and pressure wash out the block. 1948 was a long time ago and there can be deep sediment--and the plugs themselves can be about ready to go.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=97477