Re: Air Cleaner Identification

Posted by kens53clip On 2012/3/28 17:33:21

It is true that air cleaner filters are not a standard size and that if you look at measurements in catalogs, you might be able to find one that fits. However, at least with the mesh filter on my 53 Clipper, I could not find a standard filter low enough in height to fit the filter without the domed top hitting the hood. Just keep in mind, especially if you have a domed top on your mesh filter, increasing the height of your filter above the height of the mesh element on your filter may keep you from closing that hood. Of course, if you replace the stock domed top with a non-stock flat one, that will give you a bit more room.
Ken