Re: which carb kit to buy?
Posted by BDeB On 2012/4/18 12:41:55
Standard metering rods for the 928S carb are number 75-767
One size lean 75-814
Two sizes lean 75-815
Sounds like you may have a problem with the accelerator pump.
There should be a small ball and retaining ring in the bottom of the plunger cylinder which acts as an inlet check valve.
There is also a check valve for the discharge jet cluster which looks similar to the float needle. This should be installed with the point facing down.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=99406