Re: Can't remove Hyd. Lifter from 1947 Custom Super Clipper
Posted by Wesley Boyer On 2012/5/1 10:07:09
Okay, here's a little update on where I started and where I'm at. While removing the valves and hyd. lifters. Found the bottom part of the hyd. lifters stuck in both Exhaust and Intake for cylinder number one tappets.
As you can see by the picture there are marks on the block that were there before I started, so I'm guessing the guy who rebuilt the engine before, tried very hard to remove the lifters.
Attach file:
(143.62 KB)
As you can see by the picture there are marks on the block that were there before I started, so I'm guessing the guy who rebuilt the engine before, tried very hard to remove the lifters.
Attach file:
(143.62 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=100320