Re: 47 Clipper Overdrive Lock-out Cable

Posted by Randy Berger On 2012/4/30 18:04:22

I had purchased a pair of upper grille bars that someone had left in the 5/16 studs while being rechromed. Needless to say the studs were frozen in the casting. In trying to turn the studs out I could see the casting bending a little. I gave up and mixed a concoction that I read about on this forum. 1/2 Acetone and 1/2 AT fluid. I soaked the threads several times and let the solution run down to the casting where the studs were screwed in. After several application I was able to turn the studs and removed them from the casting. It worked for me and I'm a PB Blaster fan. Give it a try and let it soak in for a few days.