Re: Severe diff noise
Posted by africapackard On 2012/5/19 13:03:33
Hi JW
I managed to install the new pinion seal today and also tightened up the new pinion nut. As I dont have the necessary tool to measure the torque required, I just simply tightened it as best as possible - i.e. very tight! I used a Cleveland Nut and also Lock tite. It should never come loose again. I am hoping to start assembly soon, but is still waiting for the axle shaft seals.
The markings on my ring gear is as follows -
373215 - 4.1 Packard 3-50 59056
What does this mean for my ratios?
Regards
Barrie
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=101699