Re: Carb Problem
Posted by PackardV8 On 2012/5/18 10:11:04
Remove float. Shake flOAt and listen for gas sloshing in it. If so then it ihas a leak and will not float.
Inspect needle and seat. IF 'rubber' tipped needle then compare to a KNOWN good needle. Inspect seat to see if there is any 'rubber' in it. Ethanol destroys/swells/distorts certain but not all types of 'rubber'.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=101599