Re: drum brake removal
Posted by Tim Wile On 2012/5/22 13:27:57
I'll have to agree with those who opine that it is the combination of the pressure on the drum coupled with the shock of the hammer blows that works a recalcitrant brake drum loose. When I was pulling the hubs off of the Patrician, it took three days of intermittent hammering to get the hub off of the axle. The right side, however, came off in about five to ten minutes of work. Go figure.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=101913