Re: 47 Brake Light Switch

Posted by HH56 On 2012/6/16 18:44:20
On my diagram it shows the brake lite feed off the headlight switch.

Battery connects to post on starter solenoid which connects and feeds ammeter. Other side of ammeter goes back to B terminal on regulator and also to bat side of ign sw. That same ign sw terminal feeds the headlight switch. In addition to lights which are protected by a circuit breaker, there are 2 extra fuses on the headlight switch for feed to various body functions. The green wire to stop light sw is fed off the fuse closest to firewall.

I don't see any green wires on the regulator. Large black from ammeter to B, Large red from generator to A, 2 smaller black on the ground screw or terminal, and smaller color I can't make out from the field on generator to F. If you have that starter safety circuit, then there shows another smaller black from one of the solenoid coil terminals to the regulator A terminal.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=103518