Re: Why Trim Differences on Clipper

Posted by Randy Berger On 2012/6/6 21:34:31

Brian saidTo digress even further, I'm wondering what Buick and Cadillac used for window motor and what their service history is like.
There is a space cast for a bearing/bushing just after the armature windings before the worm drive. There is no bearing there allowing the armature shaft to flex under load and eventually snap. Bob Aller machined bearings/bushings from brass and installed them. He said that eliminated the shaft breakage problem. I have examined those motors and you can see that Mr. Aller was correct.