Re: Umpteenth power window motor failure
Posted by HH56 On 2012/8/1 20:42:50
I see what you mean about the pinion. Packards extends out quite a bit more. There appears to be a variety of motors so surely worth a look. This motor size looks about the same though so a flat adapter plate to match the different hole locations looks possible if the motor mounts in original plane.
Problem with this motor is how to either get motor closer to the rack -- which may be a problem with rack clearance to motor bolting locations or extend the shaft and pinion a bit.
Are all the different shape motors about the same with pinion location. This is one of the few that had a side view. If all the same, is the Ford shaft and pinion a solid assy or is pinion pressed on?
Attach file:
(40.41 KB)
Problem with this motor is how to either get motor closer to the rack -- which may be a problem with rack clearance to motor bolting locations or extend the shaft and pinion a bit.
Are all the different shape motors about the same with pinion location. This is one of the few that had a side view. If all the same, is the Ford shaft and pinion a solid assy or is pinion pressed on?
Attach file:
(40.41 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=106785