Re: Factory AC and glovebox.

Posted by PackardV8 On 2012/9/23 21:11:32

An "Endless Guess":

Maybe leave the glove box DISassembled as u have pictureed in the first pic above. Place pieces into the area behind the glove box opening and assemble the box there thru the glove box door opening.

Most likely the FACTORY installed the glove box liner to the dash BEFORE installing the dash. Or, placed liner in approximate position just before the dash was jockeyed into position.

How much trouble would it be to REMOVE each lower bolt ( one bolt each side on the lower mounting tab of dash near door jam), loosen mast jacket clamp at dash and tilt dash out and up letting it hinge slightly at the upper screws along the lower windshield.