Re: Rear Main Seal Replacement

Posted by Brian A. On 2012/11/12 14:08:03

Well, I ended up trimming the tab off the side gaskets only at the rear, not the front. The rear main cap had notches to hold in place the end gasket so it made installing the pan much easier. I left the notches on the front because it helped line up the gasket. The pan is on and the RTV is curing. While I was under the car I noticed the freeze plug under the engine mount was leaking so NOW I am in the process of pulling the engine to replace that bad freeze plug. Thanks everyone who helped me with this forum. It was greatly appreciated. Brian