Re: T-L Front upper control arm bushings R&R
Posted by R H On 2013/4/21 16:21:26
Randy,
If that inner sleeve is 1-1/2,,then its to short,, that looks like the ones I have.
Also, the bushings I took off did not have the points,, and I don't think the org I took off had them.
the bushings I had on there came from steve Williams,,Studebaker/Packard.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=121429