Re: HELP! - Ignition Lock Cylinder Removal

Posted by Jim L. in OR On 2013/7/19 18:48:06

I can't think of any other explanation. After I had removed the switch and let the car air out for a while, I hooked the ohm meter to the loose black wire and there was no evidence of a short. However, I don't put much stock in that as that wire loose probably doesn't touch the same things as that wire hooked up to an installed switch. I'm going to re-do that test while moveing the wire around but that's probably a waste of time as it still doen't recreate the placement at the time.