Re: Are you happy with your 4GC Carb?
Posted by Michael C Wauhop On 2013/8/3 14:57:10
I had a number of problems with the 4GC carb in my 400; so much so that I finnally put a edelbrock in its place. The main problem I have found is pinholes in the floats-of course when the floats load up with gasoline they sink causing the whole carb to malfunction. I checked on the internet to see if new floats were available-I was literally told by every carb rebuilder and carb kit supplier that no they dont exist you have to repair what you have.
About a year ago I made a trip out to Lancaster Country in Pa to Bob Stoltzfus to buy a few parts for my car; the subject came up and I mentioned the problems I had with the 4GC, specifically the floats. He asked me if I ever heard of Daytona Carb. I said I had not-he was pretty sure they had BRAND NEW FLOATS for the 4GC. and here they are below. I would strongly suggest you consult Daytona if you want to run with the 4GC. I have been told by several people that they are the TOP carb rebuilders in the country.
Attach file:
(23.01 KB)
About a year ago I made a trip out to Lancaster Country in Pa to Bob Stoltzfus to buy a few parts for my car; the subject came up and I mentioned the problems I had with the 4GC, specifically the floats. He asked me if I ever heard of Daytona Carb. I said I had not-he was pretty sure they had BRAND NEW FLOATS for the 4GC. and here they are below. I would strongly suggest you consult Daytona if you want to run with the 4GC. I have been told by several people that they are the TOP carb rebuilders in the country.
Attach file:
(23.01 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=128569