Re: Torsion Leveling

Posted by Hotrod On 2013/9/30 14:17:37

Everything has been working just fine for the last three years, but all of a sudden when my fuel pump went out, the front end also decided to take a nose dive.

Yes I did use the kit designed to convert the three prong to a two prong and wired everything just as they described. On my two prong switch I have a dk. green and a blue wire connected. On the blue wire I have voltage which is connected thru the 7 1/2 amp fuse and the purple wire to the solenoid.

Both solenoids have power at the small terminals; however, I can't really tell if the leveler is activated or not. The only way I can get the car to level is to put a ground to either small terminal to get the car to go up or down.