'56 Heater core removal

Posted by Bill Heptig On 2016/5/18 11:21:02

I'm trying to remove the heater core from my '56 Clipper, I need some help from someone who may have done this, I tried removing the screws around the top of the metal enclosure ont to realize there may be hardware on the backside by the firewall that is not going to be reachable. Looking closer there are 4 screws that attach the Heater Core Enclosure to the air plenum below it so I removed those, and then noted there is a L Bracket that secures the enclosure to the firewall on the right side so I removed that also. I've tried pulling up on the enclosure, does not seem to want to come out so questions:

- I'm hoping there is no hardware that would require dash disassembly is that needed?
- Having removed the hardware shown should this thing come off, have I missed something?

Attach file:

---

  (23.69 KB)


  (17.92 KB)


  (54.00 KB)