Re: Windshield wipers not working

Posted by JeffM On 2008/12/17 19:21:45

I oiled the wiper mechanism per instructions in service bulletin. They work much better.

However, I filled the washer jar with water to go ahead and begin using it, which I've never done before. The thing works, except water was pushed through the line adjacent to the vacuum line that goes into the manifold. So, I obviously flushed my manifold with a good dose of water. It will be fine.

I am thinking that there must be some blockage in the line that allows the water to escape to the windshield, so the pressure forced the water through the wrong line. But I don't know this to be the case. Has anyone had this problem before?