Re: Gear selector stuck

Posted by 56Clippers On 2017/4/30 13:48:42
Thanks for all the ideas.

Since I have been chasing a lot of hardened grease from sitting the past 40 years, I was hoping that it could be the problem at the bottom of the column by the lower shift lever. I'm still working to get it all out and be able to put in new grease.

I was hoping not to have to take off the steering wheel as I expect it will cause the cap to be damaged.

I checked the gear indicator and it is not an issue. Neither is the neutral safety switch.

The linkage isn't the issue as it has been removed.

The arm on the transmission, while it isn't connected to the column selector, moves positively to each specific position.

I guess I have to take off the wheel.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=190979