Re: 1955 defroster not working.

Posted by Michael C Wauhop On 2018/2/28 22:34:49

Well I was lucky the minute I stuck my head under the dashboard (nearly getting it wedged in there!!!!!!!) I saw the problem the clamp that held the cable to the plenum had come loose so there was no tension on the cable when switching it from defroster to heat. All i did was affix the cable to the clamp tighten the screw and I was good to go took me like 5 min. By the way thank you HH56 your diagram of the plenum showed me exactly where the problem was!