Re: 56 fuel gauge not working

Posted by Mr.Pushbutton  On 2009/1/16 23:43:23
you will need a big O ring to seal the tank back up when you are done. I foxed mine by taking the sending unit out, finding the thin brass "flex" strip broken, and soldering on a patch, after abrading the brass to accept the solder. Be careful with the toy tabs on the housing of the sending unit, they should be heated before you bend them.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=20167