Re: 55 patrician tail lights

Posted by John On 2018/7/27 8:38:55

It used to be when a turn signal would blink, but the dash indicator was out indicated one bulb (front or rear) was not working, and if the dash indicator was on, but did not blink, it was the other (front or rear) bulb that was not working properly. I would check the bulbs in the rear to make sure that they are dual filament and that the sockets are not distorted. I have had a bent socket allow one of the bulb contacts to bridge the socket contacts. I have also seen a socket that was worn enough that the bulb could be put in 180 degrees out and that would bridge the contacts as well.