Re: Brake reservoir leakage
Posted by Bill Heptig On 2018/8/5 10:33:05
I wrenched this apart this morning what I find differs from what the drawing suggests should be there and what was described.
It appears that someone used something akin to plumbers tape at the base of the plug and then used a copper washer to try and get this to seal.
The hose may be a substitution as well, its a Gates hose, I've tried to remove the ends but they don't seem to want to come apart so I'm guessing they were made as one?
This is not the stock setup, correct?
Attach file:
(115.73 KB)
(76.66 KB)
(61.85 KB)
It appears that someone used something akin to plumbers tape at the base of the plug and then used a copper washer to try and get this to seal.
The hose may be a substitution as well, its a Gates hose, I've tried to remove the ends but they don't seem to want to come apart so I'm guessing they were made as one?
This is not the stock setup, correct?
Attach file:
(115.73 KB)
(76.66 KB)
(61.85 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=204930