Re: 55 400 Taillight removal
Posted by BDeB On 2019/7/5 18:05:01
Here is a photo of a 1955 tail light showing the grommet that goes through the hole in the body with the larger shoulder on the outer side
Installation at the factory would have been done by feeding the wire through the hole in the body from the rear and pulling the then soft rubber grommet in place from inside the trunk
Attach file:
(150.38 KB)
Installation at the factory would have been done by feeding the wire through the hole in the body from the rear and pulling the then soft rubber grommet in place from inside the trunk
Attach file:
(150.38 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=213126