Re: Treadle Vac Conversion

Posted by HH56 On 2022/1/30 18:59:36

I saw the photo in the article but not on ABS site. What I am concerned about is that the angle of Packards floor points the master down into the frame and steering box. It is a straight shot and if the linkage piece is thin enough that might work with a short master. If not, wonder if it could be mounted differently or maybe some kind of angled piece could be added toward the bottom of the linkage bracket to tip the end of the master up to clear the steering box or let any tubing connecting on the sides clear the frame.