Re: Unidentified engine noise?

Posted by HH56 On 2009/3/27 10:34:46
Check the fuse labeled instrument cluster for your gauges. If OK, then check the connections. The fuse block terminals are prone to corrosion from just sitting, as are many others. Corrosion or poor connections could well be issues throughout the car..

The bulbs should be available at any auto parts store. Should be a standard 12v, 7inch although the lens pattern may not be same as old.

If the contacts in voltage regulator are bad, symptoms would be varied. If they're pitted and weld closed, the max charge will show and gen will overheat and overload in short order. If they are making poor contact, then charge rate will be non existent or very low even if battery discharged. If gen brushes bad or poor connection, usually same low charge symptom. Owen mentioned the bearings so by all means check them if you have doubts or suspicion.

The noise seems to be speed and motion related. mikec mentioned a few items--also wonder about tires.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=24736