Re: R4GC carb rebuild tips?

Posted by CarFreak On 2023/7/5 8:33:42
be patient when dealing with the carb. Make sure you have the appropriate size screw drivers to remove the fasteners.

being clean will be your friend. Carb cleaner will only go so far. If you can sink it into a bath to soak or an ultrasonic cleaner would be best.

The jets are brass, again make sure you have the appropriate sized driver to get them out.

Getting yours apart may be fairly simple and straight forward, but depending on how the carb was cared for the past 65 or so years there could be some varnish keeping everything stuck together.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=258859