Re: 1956 Packard 400 Fuel guage & sending unit

Posted by CarFreak On 2023/8/8 8:34:00

I got mine from Kanter and installed with no issues. Works well. It is about a couple week lead time until it arrives at your door.

if your worried about the gas gauge reading right. One thing you can do is install the sending unit in the tank, attach the sending unit wire to the sending unit and run a jumper wire from a good ground on the tank to the body. turn the key on and note where the gas gauge is sitting, that is when the tank is physically empty. Turn the tank over and wait a minute or two. that will be your gauge reading once the tank is fuel. If you dont like where either is at you can bend your float arm to adjust the full and empty points on the gauge.