Re: Interference of R/H turn signal light socket with A/C duct

Posted by Pete '56 On 2023/11/25 14:39:02
I measured the distance from the tab on the vent to the edge of the dash edge, it comes out to approximately 2 9/32". Don't know if any of you can take a measurement on a dash you have but if not, does this look about right?

Attach file:


jpg  Vent measurement.jpg (309.36 KB)
225045_65624d566d1c6.jpg 2048X1536 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=265012