Re: Torsion level suspension

Posted by humanpotatohybrid On 2024/1/1 10:35:03

See pp. 44-45 of the electrical manual if you want to set the height manually with the switch off. Ground terminal B on the "compensator" until the rear raises to the desired height. (Hint: the correct height is easy to tell with the fender skirts on as the bottom of the skirt will be centered with the rear wheel.)

If this does not work there are other ways but you must be very careful if you apply power that bypasses the limit switch as the motor is geared low enough to damage the suspension if the limit switch is bypassed.https://packardinfo.com/xoops/html/downloads/servicemanual5556/Sect08_Electrical.pdf