Re: Vent Window Nylon Repro Project

Posted by humanpotatohybrid On 2024/4/14 8:10:37

Here are some photos of what needs to be removed for an installation on a sedan. Note: here I use a “shortcut” method of bending one of the moulding (30.356) mounting tabs out of the way (can be bent either in or out). If you don’t want to do this, simply follow the service manual instructions to RNR the vent window and reference these pictures for details.

Again remember the split in the bushing must face towards the front of the vehicle (same as original installation).

Parts shown in the bottom photo, from top to bottom, are:
30.431 469156/469157 Deflector
30.401 G161627 #8 x 3/8 Self Tapper (2 pcs)
30.401 G161627 #8 x 3/8 Self Tapper (2 pcs)
30.407 Window
??.??? G161627 #8 x 3/8 Self Tapper
30.4146 474335 Stop
30.414 474337 Clamp
30.414 G441376 #10-32 x 5/8 Screw
30.414 G138479 #10 Ext Tooth Lockwasher
30.4143 474336 Spool Bushing
30.401 435477 #12-24 x 1/2 Screw
30.401 G125751 #12 Ext Tooth Lockwasher

Attach file:

---

  8ED23F6A-37D0-4E9E-80B1-CBE42C1353A3.jpeg (1,084.35 KB)


  A181E700-BEA3-4E34-8CE2-286098B0DE0B.jpeg (3,563.97 KB)


  F8D19822-6152-4045-B4AC-6719995B2C9D.jpeg (275.92 KB)


  28BF60BE-9429-4350-816D-1F63794F6636.jpeg (4,951.09 KB)